Implications of Nitrogen Doping on Geometrical and Electronic Structure of the Fullerene Dimers

Because of its unsaturated bonds, C₆₀ is susceptible to polymerize into dimers. The implications of nitrogen doping on the geometrical and electronic structure of C₆₀ dimers have been ambiguous for years. A quarter‐century after the discovery of azafullerene dimer (C₅₉N)₂, we reported its single crystallographic structure in 2019. Herein, the unambiguous crystal structure information of (C₅₉N)₂ is elucidated specifically, revealing that the inter‐cage C—C single bond length of (C₅₉N)₂ is comparable with that of an ordinary C(sp³)‐C(sp³) single bond, and that the most stable conformer of (C₅₉N)₂ is gauche‐conformer with a dihedral angle of 66°. To amend the structural deviations, geometrical structure of (C₅₉N)₂ is optimized by a B3LYP‐D3BJ function, which is proved to be more consistent with its single crystal structure than those by the commonly used B3LYP function. Moreover, the calculation method is also suitable for other representative fullerene dimers, such as (C₆₀)₂ and its divalent anion. Additionally, the dissociation of (C₅₉N)₂ at 473 K under mass spectrometric conditions suggests the inter‐cage C—C bond is relatively weaker than an ordinary C—C single bond, which can be explained by the interaction energies of inter‐cages.     

Catalytic Asymmetric Mannich‐Type Reaction Enabled by Efficient Dienolization of α,β‐Unsaturated Pyrazoleamides†

(E)‐α,β‐Unsaturated pyrazoleamides undergo facile dienolization to furnish copper(I)‐(1Z,3Z)‐dienolates as the major in the presence of a copper(I)‐(R)‐DTBM‐SEGPHOS catalyst and Et₃N, which react with aldimines to afford syn‐vinylogous products as the major diastereoisomers in high regio‐ and enantioselectivities. In some cases, the diastereoselectivity is low, possibly due to the low ratio of copper(I)‐(1Z,3Z)‐dienolates to copper(I)‐(1Z,3E)‐dienolates. (Z)‐Allylcopper(I) species is proposed as effective intermediates, which may form an equilibrium with copper(I)‐(1Z,3Z)‐dienolates. Interestingly, the present methodology is a nice complement to our previous report, in which (E)‐β,γ‐unsaturated pyrazoleamides were employed as the prenucleophiles in the copper(I)‐catalyzed asymmetric vinylogous Mannich‐Type reaction and anti‐vinylogous products were obtained. In the previous reaction, copper(I)‐ (1Z,3E)‐dienolates were generated through α‐deprotonation, which might form an equilibrium with (E)‐allylcopper(I) species. Therefore, it is realized in the presence of a copper(I) catalyst that (E)‐α,β‐unsaturated pyrazoleamides lead to syn‐products and (E)‐β,γ‐unsaturated pyrazoleamides lead to anti‐products. Finally, by use of (E)‐β,γ‐unsaturated pyrazoleamide, (E)‐α,β‐unsaturated pyrazoleamide, (R)‐DTBM‐SEGPHOS, and (S)‐DTBM‐SEGPHOS, the stereodivergent synthesis of all four stereoisomers is successfully carried out. Then by following a three‐step reaction sequence, all four stereoisomers of N‐Boc‐2‐Ph‐3‐Me‐piperidine are synthesized in good yields, which potentially serve as common structure units in pharmaceutically active compounds.     

Rapid and label-free classification of pathogens based on light scattering,reduced power spectral features and support vector machine

The rapid identification of pathogens is crucial in controlling the food quality and safety. The proposed system for the rapid and label-free identification of pathogens is based on the principle of laser scattering from the bacterial microbes. The clinical prototype consists of three parts: the laser beam, photodetectors, and the data acquisition system. The bacterial testing sample was mixed with 10 mL distilled water and placed inside the machine chamber. When the bacterial microbes pass by the laser beam, the scattering of light occurs due to variation in size, shape, and morphology. Due to this reason, different types of pathogens show their unique light scattering patterns. The photo-detectors were arranged at the surroundings of the sample at different angles to collect the scattered light. The photodetectors convert the scattered light intensity into a voltage waveform. The waveform features were acquired by using the power spectral characteristics, and the dimensionality of extracted features was reduced by applying minimal-redundancy-maximal-relevance criterion (mRMR). A support vector machine (SVM) classifier was developed by training the selected power spectral features for the classification of three different bacterial microbes. The resulting average identification accuracies of E. faecalis,E. coli and S. aureus were 99%, 87%, and 94%, respectively. The overall experimental results yield a higher accuracy of 93.6%, indicating that the proposed device has the potential for label-free identification of pathogens with simplicity, rapidity, and cost-effectiveness.     

Discussion of the protein characterization techniques used in the identification of membrane protein targets corresponding to tumor cell aptamers

Aptamer is an oligonucleotide chain with specific binding ability to protein and other targets,which is widely used in ma ny fields.Because of its ability to screen the premise of unknown targets,it can be used to discover some novel tumor markers,i.e.,membrane proteins that are specifically highly expressed on the surface of tumor cells.Tumor markers can be used in many fields such as early diagnosis and treatment,and a new type of tumor marker proved to be effective can significantly improve the therapeutic effect of such tumors.However,further characterization of newly acquired membrane proteins is essential for their clinical use as tumor markers.This review first briefly introduced the process of obtaining novel tumor markers from nucleic acid aptamers.Next,the commonly used protein characterization methods could be used as a technical means to identify membrane protein targets corresponding to tumor cell aptamers,to clarify the principles,advantages and disadvantages of various means,and to analyze the most suitable situations for various experimental methods.Finally,the outlook was made and the characterization methods that should be used in such experiments were summarized.     

Tris(pentafluoroethyl)silanol Derivatives and the Lewis Amphoteric Tris(pentafluoroethyl)silanolate Anion, [Si(C2F5)3O]−

While alkyl-substituted siloxanes are widely known, virtually nothing is known about perfluoroalkyl siloxanes and their congener species, the silanols and silanolates. We recently reported on the tris(pentafluoroethyl)silanide ion, [Si(C₂F₅)₃]⁻, which features Lewis amphoteric character deriving from the pentafluoroethyl substituents and their strong electron-withdrawing properties. Transferring this knowledge, we investigated the Lewis amphoteric behavior of the tris(pentafluoroethyl)silanolate, [Si(C₂F₅)₃O]⁻. In order to examine such Lewis amphoteric behavior, we first developed a strategy for the synthesis of the corresponding silanol Si(C₂F₅)₃OH, which readily condenses at room temperature to the hexakis(pentafluoroethyl)disiloxane, (C₂F₅)₃SiOSi(C₂F₅)₃. Deprotonation of Si(C₂F₅)₃OH employing a sterically demanding phosphazene base allows the characterization of the first example of a dimeric triorganosilanolate: the dianionic hexakis(pentafluoroethyl)disilanolate, [{Si(C₂F₅)₃O}₂]²⁻, implies Lewis amphoteric character of the monomeric [Si(C₂F₅)₃O]⁻ anion.     

Multi-functional cotton textiles design using in situ generating zeolitic imidazolate framework-67 (ZIF-67) for effective UV resistance,antibacterial activity,and self-cleaning

Cellulose - In this study, a multifunctional cotton fabric with durable superhydrophobic, antibacterial, and UV resistance properties was prepared by in situ growth of zeolitic imidazolate...     

金属有机框架(MOFs)材料在锂离子电池及锂金属电池电解液中的应用

总结了金属有机框架(MOFs)材料在锂离子电池电解液中的研究进展. 通过归纳锂离子电池长期存在的一些缺陷, 随后将MOFs材料作为离子筛、人造负极保护层、准固态电解质以及用来调节电解液构型, 使得锂离子电池的性能得到显著提升. 最后, 基于MOFs材料本身的特性, 还对MOFs材料在电化学储能领域中的后续应用进行了合理地前瞻性展望.     

固体氧化物燃料电池流道结构的研究进展

固体氧化物燃料电池(SOFC)以其燃料使用种类广泛、全固态、可以实现热电联产等特有的优势,广泛应用于家居、商业、工业热电联产和便携式用电设备等领域,是一种极具发展前景的绿色发电装置。连接体是SOFC的重要部件之一,其流道结构直接影响反应气体的利用率以及燃料电池的排水及散热性能,对SOFC的综合性能有很大的影响,是SOFC的一个重要的研究方向。本文概述了SOFC的常见结构及其特点,包括平板式、管式和瓦楞式结构。并综述了近十余年来SOFC流道的设计与研究进展,以期对SOFC的流道结构设计和研究提供参考。     

Dithienylmaleimide-based D-A Conjugated Polymer Film: Photo-Responsive Behavior and Application in Electrical Memory and Logic Gates

Solid-stated smart polymers responsive to external stimuli have attracted much attention for potential application in the field of photoelectron devices, logic gates, sensor, data storage and security. However, it is a bigger challenge for polymers than that for small molecules in solid state to acquire stimuli-responsive properties, because polymers with high molecular weight are not as easy to change the packing structure as small molecules under external stimulation. Here, a D-A type alternating copolymer PTMF-o containing 3,4-bisthienylmaleimide(A unit) and fluorene(D unit) is designed and synthesized. Upon irradiation of sunlight, PTMF-o film exhibits a photo-response with the color altering from purple to colorless. It is attributed to the structure of copolymer transformed from ring-opening form(PTMF-o) to ring-closure form(PTMF-c), resulting from the oxidative photocyclization of 3,4-bisthienylmaleimide unit. Consequently, the ability of charge transfer(CT) from fluorene to 3,4-bisthienylmaleimide unit in PTMF-o can be easily weakened by light stimuli. PTMF-o film displays a WORM-type resistive storage performance for the strong CT. Interestingly, after exposure, the electrical memory behavior in situ transfers into FLASH type, due to weak CT in PTMF-c. PTMF-o film can also be employed as smart material to construct NAND and NOR logic gates by using light as input condition. The work provides a simple way to modify the electronic properties of polymers and realize stimuli-response in solid states.     

亚表面引发原子转移自由基聚合构筑温度响应型纳米纤维油水分离膜

亚表面引发聚合是一种用于制备共价嵌入型聚合物刷的新型改性策略. 该方法在发展高稳定性聚合物刷功能化表界面材料方面具有显著的优势. 本工作利用亚表面引发原子转移自由基聚合(sSI-ATRP)对静电纺丝聚丙烯腈(PAN)基纳米纤维膜进行亚表面改性, 通过接枝聚N-异丙基丙烯酰胺(PNIPAM)制备了温度响应型纳米纤维油水分离膜(PAN-sg-PNIPAM). 当温度低于低临界溶解温度(LCST)时, PNIPAM链与水分子之间的强氢键作用使得聚合物链完全伸展, 分离膜表面亲水且对油滴具有非常低的粘附力, 对油水乳液具有非常高的分离效率(达98.7%); 当温度高于LCST时, PNIPAM链失水收缩, 膜表面变得更加疏水且对油滴的粘附力显著增加, 其油水乳液分离效率显著降低, 仅为9.1%. 此外, 由于共价嵌入聚合物刷的高稳定性, 该分离膜在4 kPa压力下, 20 ℃和45 ℃之间可逆切换10个循环后, 仍能保持非常稳定的渗透通量. 本研究为发展高稳定性的智能型油水分离膜提供了一种新方法.